C2206 Vehicle Configuration Mismatch

C2206 Code - when the Anti-Lock Brake System (ABS) Module detects the signal from the gateway module relevant for vehicle characteristic is missing for a period greater than the specified fault duration.

Possible causes C2206 Code

• Vehicle Configuration Mismatch
• ABS Module Initialization
• Anti-Lock Brake System (AMS) Module

Diagnose C2206 Code

Step 1. Verify the DTC is active

Turn the ignition on, with the scan tool select ''Miscellaneous Functions'' and restore vehicle configuration. With the scan tool, record and erase the DTCs. Cycle the ignition switch off then on. With the scan tool read the DTCs.

Is the DTC active at this time?

Yes, go to step 2.

No, Perform the ABS Verification Test.

Step 2. Initialize the ABS Module

Cycle the ignition switch off then on. With the scan tool, under ''Miscellaneous Functions'' run the ABS Initialization routine. With the scan tool, erase DTCs. With the scan tool, read the DTCs.

Does the DTC remain active?

Yes, replace the Anti-lock Brake System (ABS) Module. Perform the ABS Verification Test.

No, test complete, the condition or conditions that originally set this DTC are not present at this time.

Share this post